Aerol & Afra Products

Product Details:

•Aerol® Electrical Contact Cleaner Spray is a cold cleaning, solvent type spray, which extends the operational life, reduces downtime and maintains electrical equipment and components.
•It cleans dust, dirt, carbon, oxide deposits, flux, rust, grease, oil and other common contaminants. It restores resistance values and electrical properties.

Product Details:

•Aerol® Silicone Conformal Coating Spray is a air-drying, single component, solvent based, preparation which cures to form a tough, transparent and flexible film on the surface to which it is applied.
•It is a useful product for protection of articles subject to weather, moisture, extreme temperature, chemical and dust attack.

Product Details:

•Afra® Heavy Duty Silicone Free Spray is a pressurized solution of proprietary ingredients and solvents. On spraying, the propellant and solvent evaporate, leaving behind a thin film of active ingredients. These films of actives act as release agents in the Injection molding operations of plastics and also as an anti-spatter agent in welding operations. These grades have been specifically designed for applications where the presence of films of silicone fluids is undesirable.
•Unique Silicone Free preparations designed for mold release of molded articles that are required to be painted, printed, electroplated, metalized or glued. The actives transferred to the molded article is compatible with most paints, inks and coating materials and does not hamper the adhesion of the paint ink or coating materials tothe substrate.
•There is no need to degrease the molded article prior any post molding operation. These mold release sprays are compatible with ABS, Nylon, Polypropylene, PPO, Polystyrene, Polycarbonate, ABS, Acetyl, Polyester, Polysulfone, Polyethylene and several Rubbers & Metals.

Product Details:

•Aerol® Chain Oil Sprays are based on synthetic fluids designed to lubricate chains operating in conditions of high temperature, high load, moisture and corrosive environments.
•They significantly extent the service life of the chains operating in food processing factories.

Product Details:

•Afra® Heavy Duty Silicone Spray for Mold Release are Silicone based aerosol preparations and are available as several grades specifically for Injection Molding and Thermoplastic Industry.
•They are designed to improve release efficiency in many processes including compression, transfer, vacuum forming, pour casting, die casting and extrusion molding.
•These mold release sprays are compatible with ABS, Nylon, Polypropylene, PPO, Polystyrene, Polycarbonate, ABS, Acetyl, Polyester, Poly sulfone, Polyethylene and several Rubbers, Waxes, Resins & Metals.

Additional Information:

• Packaging Details: 24 PIC BOX

Product Details:

•Aerol® Corrogard Wax Sprays are primarily used for corrosion and rust prevention.
•Upon spraying, they leave a sag/non-sag type, non-drying coating that has the ability to uniformly coat substrates with complex under cuts and contours.
•The corrosion preventive properties meet IS 1154 Standards and pass the Salt Spray test for a minimum of 96 hours.

Product Details:

•Aerol® Galvasil Spray is a zinc enriched coating designed to repair galvanized and corroded surfaces damaged by weathering, welding, cutting, machining etc.
•This coating is highly corrosion resistant, weather resistant and high temperature resistant up to 200°C.

Product Details:

•Improves engine performance & efficiency.
•Oxygen sensor safe.
•Removes Grease, Oil and Varnish.
•Eliminates need to disassemble parts.

Product Details:

•Aerol® Adhesive Grease Spray is a useful and handy service aid, which contains a modified, high performance grease and PTFE, in a spray can.•The Grease sprays out like an oil but stick to the substrate like a grease without flowing off.•The grease is resistant to high temperature (160°C), outdoor weather condition and water washout.

Product Details:

•Aerol® Belt Dressing Spray is a special maintenance aid that prevents belt slippage, optimizes the performance of the belt drive and extends the life of the belt.
•It prevents premature wearing and promotes better grip and traction.
•Applications: It is used on all kinds of belts of machinery and automobiles: V-belts, round & flat belts.

Product Details:

•Aerol® Corrogard 6 in 1 Spray is a Multifunctional penetrating oil spray, designed to provide six outstanding features.
•It penetrated rusted/ jammed assemblies, lubricates mechanisms, displaces moisture from metal surfaces, stops squeaks in moving parts and protect metal surfaces against corrosion.
• The corrosion preventive properties meet IS 1154 Standards.

Product Details:

•A speciality cleaner cum degreaser for metal surfaces.•It is a cold cleaning, solvent based fluid, which dissolves most waxes, lubricants, dirt, grime, carbon, silicone, tar etc.

Product Details:

•Aerol® Metaklin, Metal Degreasing spray are a range of speciality cleaner cum degreaser for metal surfaces. They are cold cleaning, solvent based fluid, which dissolves most waxes, lubricants, dirt, grime, carbon, silicone, tar etc. They are used to degrease and clean moulds, dies, components, machinery and inaccessible parts of equipments & assemblies.

Product Details:

•Silicone Free, CO2 Based Formulation.
•Premium Grade.
•Non Flammable Composition.
•Packing: 24 cans in one corrugated carton.